[quote name=“iawgoM” post=“56684” timestamp=“1391372466”]
[quote author=svennand link=topic=7142.msg56598#msg56598 date=1391344891]
Im pretty happy with my freevnc, it just works. and don’t have the number of computers limitation as the team viewer free version.
I also figured out that its not the card that is causing the mockup in regards to need of dummy.
It seems its the mobo that is causing the headache for some reasons (was amazed when i moved the card to another mobo i had no need for the dummies), exact same windows install/amd drivers etc.
[/quote]
Few questions:
1. What motherborad is that?
2. If I have a rig with 4 GPUs, do I need dummy plug for all of them or just for one?
3. If I actually have a monitor connected to one GPU, do I need dummy plugs at all?
[/quote]
1. uuuuuhm, i have 8 rigs all with different mobos, its like russian rullett if you need it or not. for example the one you really do not need on is a bitch to get working several cards on in general
2. if you get a setup where this is a problem you will need a dummy plug in each card, (not including the “main card” if you have an monitor plugged in)
3. If you have an monitor connected to one GPU you will get full speed on that GPU, the rest will run idle at around 80khash, until you put dummie plugs in em.
If you dont have the setup yet, go to ebay and buy a small stack of DVI-I and a small pile of 68 or 75ohms resistors. then in case it becomes an issue at least you have the solution ready,
also it cost next to nothing for those things, think i paid like 10GBP for 20x DVI-I with matching resistors including shipping.