Posts made by gwbraa

The p2pool it’s amazing for this pool http://p2pool.neoscrypt.de/
The weird thing this wallet xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx you cannot even see their balance but their taking a nice cut with only 600K
I will keep watching this, but smells something weird. can you guys check this pool and this wallet

ftc.siweb.co:19327

This will be the final version!!
I will try to keep alive this node for as much I can. I will be putting some hash power as well.
Let’s see the results in one month
How Can I know the number of blocks discovered by the node?

no feathercoins for payment??

@wrapper said:

@gwbraa said:

Wellenreite Can you tell me How Can I not connect to the other nodes?
I will set upt a dedicated server and I wanna try run the 200MH/S for some couple hours and I do not want to get everyone not making shares because I am to fast.
Also How can I setup a hostname for the p2pool server??

Thanks

Re causing large swings in the p2pool difficulty :

I don’t think there will be a problem (at that scale). I received shares for a much lower proportion of the p2pool with both Bitcoin and Litecoin mining.

We have also monitored 10 - 50 MHash/s variations in p2pool, which the p2pool algorithm handled no problem …

In practice what will happen with p2pool if the hash rate goes up, the Global pool members will get more payouts, but a lower rate. When there are few miners / hash, it pays out less often, but higher … The p2pool share system is quite effective at adjusting as the global hash rate changes.

plus we can always monitor the situation, if you let us know when you are testing…

It is theoretically (and practically) possible to make different “colours” of p2pool pools. It is possible to adjust some parameters, so that the p2pool will only connect to a similar compiled pool. This means it would be possible to gave a p2pool adjusted for lots of small hash miners, with lower shares more often, and different coloured pool optimised for high hashing rates, but say short periods (like weekends).

Unfortunately, that sort of facility is not built into p2pool yet, although you can experiment, as it’s open source.

Yeah around this number I did not had any problem

@Wellenreiter said:

Not sure what you mean, your miners cannot connect to other p2pool nodes, or yoir node cannot connect to other p2pool nodes?

In order to set up a nodename for your node, that is known to the Internert, you need to register a domain and then create a DNS Record for the host. There is a small monthly fee for the domain.

With your bandwidth of 200 Mhash, you always will find block so fast, that other nodes have difficulty to submit valid shares before your miner finds a new block.

A possible solution:

• go for solo mining with most of your hash power and only keep a hashrate comparable to the hasrate other miners provide or may be double it. This will increase the diffculty of the blockchain, but the p2pool will keep the share difficulty low, so others can submit shares to the p2pool nodes.

I was thinking it was possible to config my p2pool to do not connect to the other nodes, so I would be mining like solo???

About the hostname I already have domains. I already setup one for the machine but I was wondering with in the p2pool I would be able to set the name for the hostname as well.

Wellenreite Can you tell me How Can I not connect to the other nodes?
I will set upt a dedicated server and I wanna try run the 200MH/S for some couple hours and I do not want to get everyone not making shares because I am to fast.
Also How can I setup a hostname for the p2pool server??

Thanks

@Wellenreiter said:

@gwbraa I have implemented ‘adaptive share difficulty’ on my p2pool server and just testing it.

It basically implements a different rule set to calculate the share difficulty on a per worker basis.

if you want to try : https://github.com/wellenreiter01/p2pool-neoscrypt
use the ‘adaptive’ branch, not the master branch.

In order to enable the adaptive share difficulty you need to add a ‘-d A’ to the start command.
The miner login is then just the payout address without any additions.

Keep in mind, that the rpcuser/password must be the last parameter of the command line ;)

Just made the chances.
I think now looks like everything it’s happening again!!

Thanks

@Wellenreiter said:

I have no idea.
you could start with +100 and see what will happen.
You should wait for 1 -2 hours to see a good result.
Then you can adjust the difficulty.
There are two different settings possible:

• user name+>number -> gives a share difficult of number+ normal share difficulty
• username/number -> gives a fixes share diff on number

I try to find the documentation so I can give a definite answer.

The weird think it’s about the shares I cannot have one share. I reboot the server and still the same.

I will keep average of 10MH/s for some hours to see what happen

I was founding a lot of blocks. but I do understand what you said. when I turn on my computer the miner he was not getting accept shares only a fews I guess because it’s too difficulty
I will keep 10 MH/s to see what’ will happen in 24 hours.

But when I was fast I was found a lot of blocks but I guess I was supposed to find even more no?

@Wellenreiter said:

@gwbraa : how man riggs do you have?

currently you provde 210 Mhash.

There is a little problem with that :(

The ‘normal miner’ has a hashrate of <= 200 khash, what is 0.1 % of your hashrate.
The result is, that your rigg currently finds blocks faster than the other nodes can provide valid hashes to their p2pool node and therefore never get paid for their mining efforts.

You can see that in the p2pool display.
Whenever the time to block is shorter than the time to share, miners with smaller hash rates have problems to submit shares before a block is found.
Whenever a block is found new work is distributed to the miners and their work is useless.

can you try the following:

• configure your miner or miners to use a higher share difficulty than the default.
  • you can do that by adding a +<number> to your miner’s user name.
  • example: ccminer -N 60 -i 19.5 -a neoscrypt -o stratum+tcp://146.185.178.40:19327 -u YOUR_FTC_PAYOUT_ADDRESS+5 -p x

There is no space between the payout address and the ‘+’ and the ‘+’ and the number.

You can vary the number.

I hope, that will enable the other miners to submit shares before new blocks are found.

What’s a good speed to make the most of it?

Diffitcult from the miners are 3555.52757900 right now

That’s help??? or not really?

I had over 200 miners connect

I read the website P2pool better now that I am not a Zombie.

Pretty nice idea it’s definitely what was looking for. It’s like mining in your own POOL.
I will try to get 100MH/s to keep for like one year in this node so more people maybe be interesting in mining using the P2pool

really nice work from you guys

@Wellenreiter said:

I assume you are referring to this line in Muddy_s howto:

screen -d -m -S ftcpool ~/p2pool-neoscrypt/run_p2pool.py --net feathercoin -f 1 -a 6qVeZcweUu3s8mS79ebaFri73pc3AW7P9f --donate 0  --w 19327 feathercoinrpc generateastrongpassword -n p2pool.neoscrypt.de -n 88.80.190.15

you can run a program in another screen by replacing the -S ftcpool with -S <another name>

screen -ls gives a list of running screens for a user
screen -r <screen name> connects to a screen running in background

Yeah but do you know another node with more workers? Because I am pretty much the only one here.
What I would like to know it’s about a list of public peers why I have to put this n p2pool.neoscrypt.de -n 88.80.190.15
This one Is it the best?

Thank you

So on the pay outs all the address there are connecting so how trough a p2pool node correct and doing some work I mean making shares?

I am following the uncle_muddy instructions

p2pool.neoscrypt.de -n 88.80.190.15

when I execute the screen Can I choose another one? Do you know a List?

Now It’s working just fine hehehe thanks so much for everything

http://146.185.178.40:19327/static/

@Wellenreiter said:

Don’t get confused with p2pool statistics and local statistiks.

The payout list on your node shows the payouts for all miners mining on the whole pool, not just your node. For exapmle 6jU5FFgUxBHsAs7LAFLxoiepsaKUCmJiyr is mining on http://104.236.34.9:19327

See http://104.236.34.9:19327/static/graphs.html?Day

HAHAHAHAHAH

I am so sorry man I just put the wrong IP hahaha I was using this node 104.236.34.9:19327
Probably I am tired. I will appoint to mine IP and than take a rest
Thank you so much again

@Wellenreiter said:

I used http://146.185.178.40:19327/static/ to access your pool and it showed some hashrate, but not 20 Mhash. Currently there are no miners working on the pool node.
http://146.185.178.40:19327/peer_addresses show connections to the p2pool cloud, so the setup of your pool looks fine.

Contgratulations :D

Thanks!!
When I am using my own computer to mine shows everything, but looks the amount of coins that I am making
see last blocks and payout
http://146.185.178.40:19327/static/new/

Right now I have over 80 miners “connect” in the pool should be around 50Mh/s
I am receiving the coins but does not show in the page

Thank you guys!!

Wellenreiter made a great job! I would like to know just why I don’t see all miners connect to my node.
Looks like usin the p2pool I am able to mining more coins than in the pool that I was mining before.

Thanks so much soon I will send a donation to Wellenreiter

The node location it’s Amsterdam