New Miner Needing Help with HD7870 settings on NSGminer?
-
nsgminer --neoscrypt - -I 13 -o http://p2pool.neoscrypt.de:19327 -O FTC address
Try this.
NSGminer sets it’self up fine, you can try adjusting once your in.
We can see if its conecting on http://p2pool.neoscrypt.de:19327/static
-
@greenuser
Re :So a good fool proof How-to-mine would be cool.
Unfortunately, technology and software changes with ASICS and such. NSGminer has recently been updated and simplified.
The correct place to have a good set-up guide is on Github with the software documentation, if possible… :)
-
@wrapper Thank you
Well im hashing at somthing…All the GPUs are same make and model but differ in Kh/s :confused:
Power load “at the wall” is as i expected. However,i was hoping for ~800KH/s for four HD7870s
Can i map my cards with commands like…
set GPU_MAX_ALLOC_PERCENT=100
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
???
Also, how do i check my my stats at the pool? http://p2pool.neoscrypt.de:19327/static is network stats.
5s:638.7 avg:645.9 u:605.9 KH/s | A:495 R:5 S:0 HW:0 WU:26.53/m
ST: 2 DW: 217 GW: 68 LW: 936 GF: 0 NB: 6 AS: 0 RF: 0 E: 4.75
Connected to p2pool.neoscrypt.de diff 1 with stratum as 6wTKzQovBDnMrhxtcR44KyL
Block: …8C5A9EE0B516B931 Diff:76.5K Started: [15:23:52] Best share: 2.85K[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
OCL 0: 57.0C 2042RPM | 167.9 169.1 142.5KH/s | A: 90 R:2 HW:0 U:6.30/m
OCL 1: 64.0C 1720RPM | 159.2 159.9 155.4KH/s | A: 98 R:0 HW:0 U:6.86/m
OCL 2: 68.0C 1814RPM | 158.7 159.4 177.6KH/s | A:107 R:0 HW:0 U:7.49/m
OCL 3: 63.0C 2441RPM | 160.4 160.4 132.1KH/s | A: 81 R:2 HW:0 U:5.67/m15:23:58] Accepted E08E361161090000x0 Diff 1.706/1.369 OCL 1
15:24:00] Accepted 686B7443A8020000x0 Diff 6.021/1.369 OCL 2
15:24:01] Accepted 12B176A6B8060000x0 Diff 2.380/1.369 OCL 2
15:24:03] Accepted 7234FC70D8000000x0 Diff 18.924/1.369 OCL 3
15:24:03] Accepted 56EFEDF7C1090000x0 Diff 1.640/1.369 OCL 0
15:24:11] Accepted 7B1C7A97A3030000x0 Diff 4.397/1.369 OCL 0
15:24:11] Accepted F146B7EA59020000x0 Diff 6.805/1.369 OCL 0
15:24:11] Accepted CBBB0D49DA0A0000x0 Diff 1.474/1.369 OCL 2
15:24:11] Accepted 3A0CD39CA4000000x0 Diff 24.883/1.369 OCL 0
15:24:13] Stratum from pool 0 requested work restart -
If you go to the bottom of the page, click Additional graphs, and scroll down till you see you Address.
The p2pool is a distributed pool where you mine for shares, you will see the proportion of the 80 FTC block fee you will share with other miners on “Global” p2pool. p2pool.neoscrypt.de is just on a server, there are lots of other instances, not just one server.
This means you can failover to another p2pool server (with same version) and keep your shares and any stratum you’ve built up.
-
Re : set GPU_MAX_ALLOC_PERCENT=100 etc
You can try them but I don’t think they are needed and the crashed my PC when I tried them, so be prepared to reboot.
-
Re: P2Pool additional graphs.
You can now see you “earnings going up” that is the current percentage of the next p2pool payout, it is the amount you would get if p2pool found the block now.
The amount you get will go up and down depending on the Global pool rate. When the next block is found will also depend on the pool rate, If the rate is high you will get more blocks but lower percentage and vica verca.
-
As for the card settings if you press [G] the [ I ] on NSGminer you cant start gradually increasing the Intensity, as you first step into mining optimization. You may get back to I 16 if the xSet commands caused the blue screen!
Note : I’ve edited the title so any one who has a HD7870 might have some better settings… I have a R9 290.
-
P2Pool just got a block 5 minutes ago, so you got a 6 FTC share, should be in your wallet now
You can see who else was on the p2pool group on blockchain explorer :
-
thanks wrapper, your cool. thanks for changing thread title.
I’m just going to let it run for a while, as I have loads of washing to do and get dry.
Mining is ideal for that.I had to restore my machine to the last restore point so when i got it back, my newley installed wallet was gone. So downloaded and ran the wallet again and it now has to reindex (2 yeas & 25 weeks behind).
The address is the same as before so it must have picked up the keystore file ok.
So i got a wait to see my FTC. :grinning:So i get a payout when we find a block?
I may bring you luck
Warm wishes
Paula. -
You can up vote any members that have helped or make informative posts , the arrows at bottom right corner of a post …
Re : Mining result, you have a reasonable rig at the moment so should see regular payouts for a while, even if Global hash rates double. Difficulty is now averaging 15, whereas it has been steady at about 7 for months, so you missed out there!
-
@wrapper said:
You can up vote any members that have helped or make informative posts , the arrows at bottom right corner of a post …
No problem,
My NSGminer stop working ~16:00h, restarted, now ok, i might disable “Areo” theme in Windows.
The blip before midday was a windows update i had been putting off.
Also, last night i was mining on the node and saw high stale hashrate, i closed NSGminer, restarted then all ok. Any ideas?
I need to keep an eye on this rig, eth mining was very stable for me.
Also; I will be updating my address in a day or so when my laptop wallet has synched.
Do we have a place on this forum where node users can all communicate?
Warm wishes
Paula -
@wrapper It isn’t possible to increase intensity past the initial. It may be reduced and increased back to the initial. Memory allocation depends on intensity. It’s performed only once on start-up.
-
Yes, she started it on I 16 - it crashed and blue screened te PC, see the “new members” part of post ,
I explained that NSGminer does a lot of auto settings…
-
yes, HD7870 max intensity is 13,
Getting stability takes time. It will come!@wrapper, i think the bit i wrote about it going blue screen was on the Newbie thread as you said. look…
http://forum.feathercoin.com/topic/8574/hello-feathercoin-i-m-looking-to-mine/13 -
Any ideas why NSGminer mines well for hours… but just decides to stop working and shuts down? i run the bat and its fine again…, for a while anyhow! I used to have an Antminer U3 like this, hmmm… doesn’t take long to get fed up with resetting. :weary:
-
@greenuser Look at the system log. It could be hardware related or pool issues.
-
@ghostlander , Application error! according to event viewer. A driver failed and then recovered just before. I’m having to reset every 2 hours. This is doing my head in, just haven’t got the time for all this, too many cloths to dry. I might go back to mining ethereum as its heat from the GPUs i’m after, the crypto coin is just a by-product, and I just don’t have the time to spend tweeking.:angry:
-
@greenuser If there was a driver recovery, reduce GPU and/or memory clocks (–gpu-engine, --gpu-memclock).
-
@greenuser said:
I use windows 7 -64bit, HP ProLiant DL380 G5 Server with four Sapphire AMD Radeon HD 7870 Dual-X 2GB GDDR5 (11199-16-20G) GPU cards and AMD Catalyst 15.12 drivers.
Ha, I remember seeing you on the ethereum forums. I posted a pic of our aging but useful DL380’s in our data center. :grin: I do remember you, the guy who had the miraculously left behind Tesla K80, and another with a near-useless M2090 (that I helped anyway).
Man, that must be close with max power draw; 2x4-core xeons + 4 7870’s, 1600Wpsu’s if I recall…
-
@bluebox said:
@greenuser said:
I use windows 7 -64bit, HP ProLiant DL380 G5 Server with four Sapphire AMD Radeon HD 7870 Dual-X 2GB GDDR5 (11199-16-20G) GPU cards and AMD Catalyst 15.12 drivers.
Ha, I remember seeing you on the ethereum forums. I posted a pic of our aging but useful DL380’s in our data center. :grin: I do remember you, the guy who had the miraculously left behind Tesla K80, and another with a near-useless M2090 (that I helped anyway).
Man, that must be close with max power draw; 2x4-core xeons + 4 7870’s, 1600Wpsu’s if I recall…@bluebox Thanks, i will put up a link to some picks for a giggle if you like…
Your memory is not that good though. I was one of the few female miners on the forum.
Don’t worry, demmographics in crypto and peoples mind set…, it’s the 21st century and we are still under represented in many areas… and yes, i have enough switch mode PSUs to start a V8 :smile:
So you left the Banking Establishment’s crypto foot-in-the door, coin to mine ftc? :smirk:@ghostlander thank you, things have settled now. One card had differing results from the other three in NSGminer. I dumped a .conf file while running and went in to have a look.
All values looked the same for each card (i did however trim my fan speeds to get all the cards at ~ the same temp) so i then looked at my AMD settings and one card was slightly overclocked in frequency for some reason. Driver seems ok now.
I note your recommendations and will try if i have further difficulties, can i just add them to the list in the .conf file of NSGminer?All running sweet now fingers X
