Whats going on with P2Pool

AcidD

@shadow1117 said in Whats going on with P2Pool:

none of the pools listed on the site had a block for 16 hours

here it says feathercoin is offline what does that mean
https://bchain.info/coins/

Switch to a block explorer running the latest production version of FTC v0.9.6 ;-)

https://fsight.chain.tips

shadow1117

ok so its normal that the p2pools somtimes take 10+hours to generate annything?

wrapper

@shadow1117 said in Whats going on with P2Pool:

ok so its normal that the p2pools somtimes take 10+hours to generate annything?

The time it takes p2pool to find a block is dependent on chance (block difficulty) and the number of miners. If p2pool is 20% of the total mining hash, it will find 20% of the blocks.

You will be accumulating shares in those blocks all the time you mine p2ool.

You won’t accumulate shares if the pool is down. It most likely your loss of shares was due to the (known fault) of the pool site being down and not switching to a backup pool.

Wellenreiter

@wrapper said in Whats going on with P2Pool:

You won’t accumulate shares if the pool is down. It most likely your loss of shares was due to the (known fault) of the pool site being down and not switching to a backup pool.

If the backup pool node is in the same p2pool cloud the shares are not lost, but taken over by the other p2pool node.

shadow1117

@Wellenreiter it seems to have problems again

http://mexicat.co.uk:19327/static/

seems to work

wrapper

@shadow1117 I think the owners on Hols. But, it looks like you lost connection, but have reconnected now?

Wellenreiter

@shadow1117
Your pool seems to work fine again. but the orphaned rate seems to be high and the efficienty low.
This can be casaused by the p2pool server not available for a while or shortly after a restart.
If the efficiency does not go up after some hours of normal work and orphaned rate goes down, something is strange.

Questions ( I assume you use wellenreiter01/p2pool-neoscrypt):

are you using the master branch version or the ‘adaptive’ branch?
I see only on client mining, is this client on the same LAN or connecting over a WAN?
- if the 2nd is the case, what is the ping time from worker to p2pool server?

shadow1117

I own neither if the pools

I mined on one of them and switched to the other this morning… both seem to work fine now… I may open my own and play a bit with the source code

AcidD

@shadow1117 said in Whats going on with P2Pool:

I own neither if the pools

I mined on one of them and switched to the other this morning… both seem to work fine now… I may open my own and play a bit with the source code

So are you saying you cant mine on http://p2pool.neoscrypt.de/ ?

wrapper

http://p2pool.neoscrypt.de:19327/static/

You don’t need a server to run a p2pool node, it can be on you own miner PC or on the Lan.

shadow1117

@AcidD yes but seems to work again I havnt tested just seen this morning that there seemed to be a problem so I switched the pool

Wellenreiter

@shadow1117

p2pool.neoscrypt.de had disk space problems today, so the pool didn’t work as espected. I assume your worker has a backup pool configured and switched to that.

p2pool.neoscrypt.de is working fine again, and the problem is solved