I need to post a question on solo mining… the gnomes are closing in so I don’t have much time left…

My internal IPv4 addresses are all within 10.0.1.1-200 range. Other things I’ve tried:

cgminer’s JSON-RPC server settings:

• … -o http://10.0.1.199:9337 -u xxxx …
• … -o 10.0.1.199:9337 …
• … -o stratum+tcp://10.0.1.199:9337 …

Other feathercoind.conf settings I’ve tried:

• with and without “listen=1”
• “rpcport=9337” and “port=9336”
• “gen=1” or “gen=0” (I’m not clear on what “generate” does but this doesn’t seem to help)

I’ve also played with the permission on feathercoin, but to no avail.

I’ve set up my feathercoin-qt server on a windows machine but I get the same problem.

Also, my router has no network service filters of any kind running.

I’m using CGMiner 4.3.5 (with Zeus scrypt support) to run my asics. I have feathercoind running on a headless machine as a server, with all my asics on the LAN pointing to the internal IP address of the feathercooind machine. I cannot get the Work Utility (WU) to read anything other than 0.0/m. My hashrate is correctly diplsaying and new blocks are being netected on the network, but WU sits at 0. Is this normal when solo mining over a LAN? My conf file looks something like this:

server=1
daemon=1
listen=1
rpcuser=myusername
rpcpassword=mypassword
rpcport=9337
rpcallowip=10.0.1.*

my cgminer commands vary depending on the machine, but for the sake of an example, this is my Zeus cgminer script:

cgminer -o http://10.0.1.199:9337 -u xxxx -p xxxxx --scrypt --zeus-chips XXX --zeus-clock 328 --scan-serial zeus:auto --scan-time 1

There are no firewalls on the feathercoind server machine. Any thoughts/feddback would be greatly apprecitaed, thanks.

I need to post a question on solo mining… the gnomes are closing in so I don’t have much time left…