That makes sense as win 7 only supports 4gb max in non x64 flavors. So you running better now?

I have been running into this a lot lately. My issue has been too high of a tc for the amount of RAM. Now, I have been trying to run on less than 4gb, so really a different situation.

However, if all else fails, you could try lowering you tc to 1, 2, or 3x your shaders and see if you can get by the error.

OK, just wanted to follow up on this. It seems that my issue was the amount of ram in the system. Not sure why sha256 seems to work but scrypt will not. Oh well.

I had 1gb and couldn’t get any scrypt mining to work. I swapped some stuff around and with 2gb I am able to get it mining using .conf files. It still will not run if I try to launch using .bat files with flags like I originally was. Fails with the same error as is posted above.

Anyway, I am just posting this in case anyone else comes across this as I was unable to find any good info on this specific error.

Tried to repair SDK last night - no go
Tried complete uninstall of AMD software (catalyst and sdk) - no go
Tried my 7950 in my ‘problem’ rig - no go
Tried my 270x in my ‘working’ pc - works

Definately something with my rig setup, but not sure what. Again, if I remove the ‘scrypt’ from the .conf it acts fine, other than running in MH/s instead of KH/s and, you know, not working for scrypt coins. :'(

ok, the conf file helped me track down some additional information. Not sure that I know what it means thought.

I am able to get cgminer running if I remove the scrypt flag. Not very useful, but it at least gives me some information that says for whatever reason the problem is because of trying to use scrypt. Not sure if that means SDK wasnt installed good or something else. Guess I’ll continue to dig.

RAM or PS is what I am thinking may be wrong. As I am just using old just mb/ram/ps I had laying around to set this one up it only has 1GB of RAM and it is only a 430W junker ps. I am going to try to move it into my current pc with my 7950 later today assuming my riser cables come in.

I will try to modify using a .conf file and see if that changes anything though. Thanks for input! :)

As I posted earlier, I already looked at that thread.

Perhaps I am blind, but I dont see any reference to any issues in that thread where a card is being disabled. If you could point me to which part of that thread you think would be useful, I would appreciate it.

Yep. Running on version 2.9, same as in my pc running on a 7950.

I just read through the link you posted and don’t see any reference to what my problem is or any possible solution.

Hello all. I could use some help.

I have been running cgminer 3.7.2 on a 7950 on my desktop for a couple of weeks. Decided to start setting up a rig and am having some issues. Here is what I have

Asus 270X
Fresh install of Windows 7 x64
Catalyst 13.11 Beta9.4
SDK 2.9
Cgminer 3.7.2

I am trying to run cgminer with just the following
“setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt -o [url=http://p2pool.org:9555]http://p2pool.org:9555[/url] -u -p x”

I am getting the following error with this setup:
“Error -4: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)
GPU 0 failure, disabling!”

This is essentially the same setup I am running on my main pc with my 7950, although with more param’s and it is working fine. Not sure what I am doing wrong.

Help is appreciated.