Posts made by majsta

I m just buying more and consider all of that as a best investment ever made. So far I have about 150K with a plan to exchange some of them for BTC maybe in 2018 or later. Let’s face it if FTC die then complete crypto will die. I consider FTC as a member of top 5 coins list.

What was the problem is that for ppl who had FTC placed in orders was unable to withdraw. We was unable to cancel it but now it is fine. Just now I send my FTC to my wallet.

It is hard for me to believe that this was the reason. If we compare other coins on coinmarketcap FTC trading volume was huge.

Anyway someone from FTC team should contact them because they locked all FTC coins and we can’t withdraw them yet.

We are removed… What can I say, I don’t know why. There is no real reason I can think of to explain what happened.

Yes, I have seen that. But like history teach us that is something that couldn’t be 100% trusted. Btc-e said that they will delist FTC few times before but they never did that. Remember December of 2013.

@Calem

It is possible. I said that I think that hardware part is prepared for every algo. Problem is not KNC itself they had their profit. Problem is that they need to satisfy all the buyers who don’t have anything profitable to mine right now. They are jumping from coin to coin(scrypt or nscrypt) trying to find any kind of profit. Only solution is to cover more and more algos.

@mirrax

You are expecting to give you link to the official statement from someone from KNC? News don’t travel like that anymore…

@cisahasa I got an tip that KNC is testing other firmwares, now on FTC. I wanted to say that I think that they prepared their hardware part to support anything. It is possible that no one can say for some algo that is ASIC resistant. If you look what happened to nscrypt coins last few days you will understand what I m saying. If you look at few miners joining to coinotron and if you calculate you will see that they have at least 800 280x cards to achieve that performance and I think that it is impossible to have that much.

It seems to me that KNC is up to publishing firmware for their Titan miners. Someone is testing FTC on coinotron again.

No improvement after all testings only few kh/s on 280X. With 13.6 rc2 didn’t worked at all. Strange thing is when I use old bin build on older sgminer also on 14.6 rc2 it works but reports same speed. Latest version builds bin 3 times bigger than old one with same settings.

@Wolf hah as you know often in life prize goes to the one who didn’t deserved much :) When I started to port neoscrypt to sgminer it took me 3 days and I ended with bug I wasn’t able to fix without more work. Eventually I stopped my work regarding that but now I m glad because knowing me instantly I would share that with ppl instead keeping that for myself earning lot of coins each day. Exactly 12 days ago I had a fastest miner and share that info on my local forum. There are ppl who have tons of FTC and none of them send me single one for increasing their performance 7 times. Next time I will not share much there. But at the end I must say that I was playing smart and didn’t mined FTC much, instead I mined UFO and earned about 1.3BTC from 6 hours of mining in day one, then I use them to buy more FTC, still holding lot of UFOs :) So neoscrypt is win win situation :)

It seems to me that I have received 558.4877956 FTC for my discovery of xintensity settings. Tnx ppl, didn’t expect so much :)

He’s quite insane, but a good coder.

Hehe let’s say that maybe all of us are little insane just being in crypto those days :)

Hehe it is interesting how things are changing, all the things I said and some ppl didn’t believed are writing now. Like I said high Freq is not important and any setting will do as long you use xintensity or rawintensity :) What will happen when I say that kernel will work better when you lower Freq :)

Let’s calculate rawintensity again. Shaders of your card multiply by the best result of xintensity on your card. So for 280x is 2048 x 3 equals 6144 for rawintensity then play with that value, fine tune it.

try --rawintensity 6144 or 5020 or 4096, play with similar values

No need since adding xintensity overrides intensity settings.

PPL like I said there is nothing special in my settings, it works every time on anything I just need to setup --xintensity 3. I m using 14.6 RC2 drivers and all other settings are the same like for any other miner. Here is complete line.

sgminer.exe -k neoscrypt --lookup-gap 2 --xintensity 3 --worksize 256 -g 2 -o xxxx:xxxx -u x -p x --gpu-engine “1000,1000,1000” --thread-concurrency “8192,8192,8192” --gpu-memclock “1500,1500,1500”

One more thing, I published this 5 days ago on my local forum and there is about 20 miners who use this settings for last 5 days or so.

I said only thing you need is to add --xintensity 3, increase worksize to 256 and you are done, leave other settings alone. And those are not settings for 400Kh/s, those are for 330Kh/s and you can safely lower your freq to reduce power consumption and not lose performance.

Understanding how xintensity and rawintensity works is what you need. When you read about them you will see that most of the other settings are not so important because they are set automatically and determined by the values entered in xi and raw.

During all of this time in crypto I noticed one thing. People don’t want to help them in any other way than to prepare everything in *.zip file so they can only click on specific file. Yet they will send you PM to ask you how to unzip that archive.

I don’t understand those pictures on background but hey whatever someone makes happy I m fine with it. I m just afraid that someone will enter my room when I m looking at new sgminer testings :)

Anyway here is someone for you all, I contacted Wolf0 on private but he never replied. Key to better performance(280x) is xintensity 3 or rawintensity 6144.

Have fun and remember:

FTC: 6gtMTcP8QLScgqyQivU4dj3becYVAKVuDc

3x 280X not overclocked. It can go up to 400Kh/s or more when I play with clock

[url=http://postimg.org/image/3lq5wr9sf/][/url]