Posts made by goodthebest

hey foks, there is an error in my pool a found block was rejected when I checked log and found out error, block decode failed? What could be possibly wrong?

CRYPTO CURRENCIES MINING POOL BUILDING SERVICES - TURNKEY SOLUTION
Get your mining pool ready within hours & start mining coins of your choice

We provide mining pools setup services [e.g, Yiimp etc.] both for personal, private and public pools which you setup to run a side business or a private pool that literally will allow to mine any mine-able crypto currencies.

You can get a mining pool for your own let’s say you have few rigs of your own, family and friends and been mining on other public pools but if you have your own private mining pool then you can get all blocks yourself rather than just getting part of shares.

POOL SETUP PROCEDURE AND EXPLANATION:

1. Setting up [Yiimp open source or any other pool mining application] crytocurrency mining pool and install coin’s wallet, including full configuration, compile any coins wallet daemons of your choice and algo, prepare servers for thousands of miners and even for small private pools for personal purposes.

We can also trouble shoot your existing Yiiimp pools and daemon wallets for any problem.

2. You do not need to provide password or access to your server directly. We’ll perform all tasks in front of you using TeamViewer. You will open server console on your computer.

3. Your server should either have fresh Ubuntu 16.03 or Ubuntu 16.04 installed. It can be a VPS or a dedicated server.

4. Yiimp is an open source pool software that currently supports these algorithms a5a, argon2, bastion, bitcore, blake, blake2s, blakecoin, c11, decred, deep, dmd-gr, fresh, hive, hmq1725, hsr, jha, keccak, keccakc, lbry, luffa, lyra2, lyra2v2, lyra2z, m7m, myr-gr, neoscrypt, nist5, penta, phi, polytimos, quark, qubit, scrypt, scryptn, sha, sha256t, sib, skein, skunk, timetravel, tribus, vanilla, veltor, velvet, whirlpool, x11, x11evo, x12, x13, x14, x15, x16r, x16s, x17, xevan, yescrypt, yescryptR16, yescryptR32. Therefore, any coin will work with Yiimp pool as long as they are using anyone of above algos.

5. Usually it takes 3 to 5 hours to setup pool, installation, compilation crypto coin’s daemon wallets etc depending on number of coins being installed and compiled.

6. We accept work payment in BTC, altcoins or even PayPal.

7. You get one week free of cost full tech support in case you encounter any issues or problems with your pool.

If you are interested please contact using these modes

Skype: [email protected]

Email: [email protected]

Telegram: https://t.me/goodthebest or add @goodthebest

Hi,
I can setup mining pool Yiimp [an open source pool application] within 24 hours, There are three packages being offered.

Package Basic:

• Prerequisites: You should have least knowledge of crypto currencies and you will also provide your own server and domain.

• Services include:

1. Yiimp pool application installation
2. Setting up pool for any 10 coins of your choice, it includes installation of daemons and blockchain of respective coins.

• Price: 0.04 BTC or equivalent in FTC or any other altcoin
• Completion: Task will be completed within 24 hours after payment has been confirmed.

Package Medium

• Prerequisites: You should have least knowledge of crypto currencies. You will make required payment and provide name of desired .com/.net domain for your pool and choice of upto 20 alt coins to setup pool for.

• Services:

1. server hosting cost included for 6 months.
2. Server management and maintenance for 6 months
3. Yiimp pool application installation
4. Setting up pool upto 20 coins of your choice, it includes installation of daemons and blockchain of respective coins.

• Price: 0.5 BTC or equivalent in FTC or any other altcoin, Western Union and PayPal also accepted.
• Completion: Task will be completed between 3-5 days after payment has been confirmed.

Package High Commercial Scale

• Prerequisites: You should have least knowledge of crypto currencies. You will make required payment and provide name of desired .com/.net domain for your pool and choice of upto 50 alt coins to setup pool for.

• Services:

1. high scale server that will be ready to tackle huge load, hosting cost included for 6 months.
2. Server management and maintenance for 6 months
3. Yiimp pool application installation
4. Setting up pool upto 50 coins of your choice, it includes installation of daemons and blockchain of respective coins.

• Price: 1.5 BTC or equivalent in FTC or any other altcoin, Western Union and PayPal also accepted.
• Completion: Task will be completed between 7 days after payment has been confirmed.

Let me know by email [email protected] or add this email in skype: [email protected]

I’m trying to setup a pool on yiimp and having issue with blocknotify. Yiimp is in one server while feathercoin daemon is in another server.

in server A ip: 1.1.1.1 yiimp is installed

in server B ip: 2.2.2.2 daemon is installed

Even though block has found however blocknotify doesn’t seem to work, I doubt because feathercoin.conf file is in daemon’s B server while actual pool script is on server A, there might be execution issue? How to fix it?

Here is the line I added to daemon’s feathercoin.conf file at server B: 2.2.2.2

Code:
blocknotify=blocknotify 1.1.1.1:4233 308 %s

any idea why blocknotify isn’t working? Do I need to make any changes in above line to make blocknotify work from daemon’s B server to intimate server A.

PS. I’m using Linux, Ubuntu 16.04.3

What is the block time in Feathercoin, such as in bitcoin there is a new block every 10 minute and maximum 144 blocks in 24 hours.

Looking for algorithm tutorial to develop Neoscrypt stratum, any guides?

Answering my own question in case of linux

for detailed debug report, in feathercoin.conf, there should be debug=1

run this command for real time debug,. to exit, Ctrl + C
tail -f ~/.feathercoin/debug.log

@acidd I tried and compiled nsgminer on 5 different machines and result is the same, I’m using ubuntu 16.04.3 lts version. Blocks are found but actually they are never materialized. I’ve reported to developer at Github: ghostlander (John Doering) he’s still looking into it I guess.

Even I’ve discussed same issue with Guncoin’s Peter Bushnell and he told me he ask sent a message to John Doering. Peter Bushnell said “The miner may not like Version Bit blocks. I’ll check with the developer.”, so he did report to nsgminer developer.

Perhaps you can test yourself but use GPU version, it might help to find out what’s going wrong.

Well I’ve tried nsgminer with guncoin, phoenixcoin and Feathercoin. NSGminer version compiled for CPU works fine, however GPU which is by default, Pool, Information it tells block is solved, however check account there is no clue of any transaction.

these are the paramenters i’m using both with cpu and gpu, cpu nsgminer works fine and solved block is credited (guncoin).

./nsgminer -o http://127.0.0.1:9337 -u rpcusername -p rpcpassword --coinbase-addr=xxxxxxxxxxxxfeathercoin adddressxxxxxxxxxxxxx -D --verbose

I’ve tried NSGminer GPU but it’s somehow not working well even block solved but not crediting to account, seems some glitch with nsgminer.

So any recommendation for solo miner that has coinbase GBT support for neoscrypt will be appropriated?

@AcidD Yes, we can debug from nsgminer or ccminer but they are client side. Is there a way we can check node side if blocks are being submitted etc.?

@wellenreiter It’s neat and clear answer. Yep it was about solo mining.

When we are solo mining miners are connected to daemon node, what is the command line in feathercoin-cli to debug and see how miners are performing.

Thanks, that worked like a charm. I was overlooking my wallet passphrase I forgot it was encrypted.

they are very much installed, I can do all other jobs like getbalance, getwalletinfo etc etc but sending money doens’t work, it’s ubuntu headless wallet.

Could you guys suggest suitable miner for solo mining both for cpu and gpu for feathercoin?

I’m little confused between these two, first I would like to understand what Scan and Expiry options really are in a miner such as NSGminer and what are optimal values in case of solo miner?

Feathercoin: v0.13.0.0-beta
I’ve been trying to send funds to another account using ubuntu headless wallet,

./feathercoin-cli sendtoaddress MyAccountname receiveraccount

./feathercoin-cli sendtoaddress myaccountname receiver account

but in both cases I’m getting error

-bash: feathercoin-cli: command not found

What command should I exactly use to transfer funds?

in pools shares matters but I’m talking in general private pool when let’s say I’ve 10 machines mining and they are connected to one daemon node. Are those 10 solving one block together work is divided or each one of them is assigned same block but to solve on their own?

My question isn’t regarding payout system rather to understand the theory, how does it function when one daemon has more than one miner, from your answer what I understood is each miner is solving the same block but own their own? It’s not like pieces of work is divided to miners who are connected to same daemon, to concurrently solve the problem (block) together?