It’s a bit tricky with the 7950 and 7970 when the cooling breaks since the options for after market cooling is almost slim to zero.

However, the Prolimatech MK-26 actually works like a charm! Running it on my asus 7970 DCII since the original fan went awol the same way as described here.

I’m running this bad boy package:

http://www.overclockers.co.uk/showproduct.php?prodid=BU-032-TL&groupid=701&catid=2330&subcat=787

Keeps the temp about 10 degrees celsius lower than asus DCII cooling :)

Do you know where to get them here in the americas? thanks buddy

With gridseed you can mine scrypt, thats it.

Kinda boring if all the major coins use an new modded scrypt (better for some reason, might happen). What are you gonna use your gridseed for then? paperweight?

At least with GPUs you can retarget other algos, or sell em down the road ;D

Whoa… those are charming, but pretty expensive also :-(

Well actually… the contact cleaner helped a lot, then got some WD-40 on them. Will let them rest a while before testing.

Hello there thanks for answering, well let me see. Yup Sapphire Vapors.

Hey everybody,

To my surprise two fans one in each card ran out. And looks like the same its about to happend on the other two cards. The fans are barely moving, have any of you had any problems like this before, and do you guys know is there a way I can get a replacement from AMD?

thanks a bunch!

As soon as I saw the ddrs I knew this was 4GB… but… aprox how many Mh/s?

[quote name=“RIPPEDDRAGON” post=“23665” timestamp=“1375188669”]
If you have not seen it already, it may take some time to get an accept with low hash rates but don’t be discouraged!
[/quote]

I was afraid of that… but I took like a minute to start submitting work :) thanks

[quote name=“d2” post=“23613” timestamp=“1375148808”]
[code]-pa scrypt[/code]

But I don’t believe that will work with slushs version. Use this one: https://github.com/CryptoManiac/stratum-mining-proxy

Be sure to perform step 5:

[code]cd litecoin_scrypt
sudo python setup.py install[/code]
[/quote]

Just finished setting it up… lets see how it goes… thanks

Hey everyone,

I want to put some CPUs into my minning operation, they dont have Internet acceso… so I went and git cloned the stratum proxy. Read a couple of guides so Im running it with:

./mining_proxy.py -o pool.d2.cc -p 3333 -sh 10.5.2.103

But, im just getting this… without any work beeing summited

2013-07-29 16:49:50,470 WARNING proxy getwork_listener.render_POST # Worker ‘user.pc01’ subscribed for LP
2013-07-29 16:49:50,475 WARNING proxy getwork_listener.render_POST # Worker ‘user.pc02’ subscribed for LP
2013-07-29 16:50:01,793 INFO proxy client_service.handle_event # New job 8011 for prevhash eb7791e5, clean_jobs=True
2013-07-29 16:50:01,794 INFO proxy getwork_listener._on_lp_broadcast # LP broadcast for worker ‘user.pc01’
2013-07-29 16:50:01,796 INFO proxy getwork_listener._on_lp_broadcast # LP broadcast for worker ‘user.pc02’
2013-07-29 16:50:01,831 WARNING proxy getwork_listener.render_POST # Worker ‘user.pc01’ subscribed for LP
2013-07-29 16:50:01,832 WARNING proxy getwork_listener.render_POST # Worker ‘user.pc02’ subscribed for LP
2013-07-29 16:50:21,648 INFO proxy client_service.handle_event # New job 8012 for prevhash df4ad15c, clean_jobs=True
2013-07-29 16:50:21,652 INFO proxy getwork_listener._on_lp_broadcast # LP broadcast for worker ‘user.pc01’
2013-07-29 16:50:21,688 INFO proxy getwork_listener._on_lp_broadcast # LP broadcast for worker ‘user.pc02’
2013-07-29 16:50:21,717 WARNING proxy getwork_listener.render_POST # Worker ‘user.pc01’ subscribed for LP
2013-07-29 16:50:21,718 WARNING proxy getwork_listener.render_POST # Worker ‘user.pc02’ subscribed for LP

And on the machines

[2013-07-29 16:55:59] thread 2: 82452 hashes, 2.11 khash/s
[2013-07-29 16:55:59] thread 3: 81396 hashes, 2.08 khash/s
[2013-07-29 16:55:59] thread 0: 85160 hashes, 2.18 khash/s
[2013-07-29 16:55:59] thread 1: 84756 hashes, 2.17 khash/s
[2013-07-29 16:56:24] LONGPOLL detected new block
[2013-07-29 16:56:24] thread 1: 52316 hashes, 2.18 khash/s
[2013-07-29 16:56:24] thread 3: 50368 hashes, 2.09 khash/s
[2013-07-29 16:56:24] thread 0: 52380 hashes, 2.18 khash/s
[2013-07-29 16:56:24] thread 2: 51308 hashes, 2.13 khash/s
[2013-07-29 16:56:28] LONGPOLL detected new block
[2013-07-29 16:56:28] thread 0: 11128 hashes, 2.29 khash/s
[2013-07-29 16:56:28] thread 3: 10724 hashes, 2.21 khash/s
[2013-07-29 16:56:28] thread 2: 10948 hashes, 2.25 khash/s
[2013-07-29 16:56:28] thread 1: 10952 hashes, 2.25 khash/s
[2013-07-29 16:56:39] LONGPOLL detected new block
[2013-07-29 16:56:39] thread 0: 22880 hashes, 2.23 khash/s
[2013-07-29 16:56:39] thread 1: 22604 hashes, 2.20 khash/s
[2013-07-29 16:56:39] thread 2: 22428 hashes, 2.18 khash/s
[2013-07-29 16:56:39] thread 3: 22004 hashes, 2.14 khash/s

Whats missing in the config?

thanks

Yup that did the trick… went with Debian Jessie tahta comes with GLIB 2.17 and cgminer now works… But im still not gettin the 630kh/s I used to… only 550. Will look into that.