[quote name=“wrapper0feather” post=“40979” timestamp=“1386398995”]
Pool graphs are great.

Did you zoom into 1 hour?. The day graphs will show per 24 Hours, I’d say you were running for 15 hours?

So, 9 hours at 0 KHash/sec? brings your daily average down. Best ask the miners tho’
[/quote]

Ive been running for about 5 hours, the graph says i peaked a 336 khash. Daily average? Isnt the number in the pool website an instantaneous thing? Sorry im a bit confused

Hey everybody,

I recently started mining FTC. I have managaed to get iot stable thanks to some guys in the introduction area.
My cureent problem though is that in CGminer i get about 530 Khash with stable settings, but in my pool it says im only getting 300-300khash, and it has been like this for some hours.

HW gives a reading of 0 and the percentage of UW to my hashrate is apporximately 92 pecent which is normal.

I have read some posts similair to this on other crypto forums but none have helped, hopefully someone has a solution for me.

Cheers,

CJ

Thanks but the guide gives me really low hash rates (around 300).

Ive gone back to another stable setting but I am having yet another problem, and i cant find the solution anywhere :-\

In CGminer it reports i am getting approximately 5xx khash, but in my pool i only get 2xx. I have looked at people who haid a similair problem and they said reduce the intensity for less hardware errors, but im not getting any hardware errors. Also, my WU is hovering at 92% of my hash rate which is normal. So why isnt the hash rate in my pool the same as CGminer?

Thanks guys im really impressed with your knowledge,

after having it running for awhile i decided to optimise a little and get the best i can out of the card. Following this guide i entered everything and ran CGminer.

[url=http://holynerdvana.blogspot.com.au/2013/05/detailed-settings-for-600khashsec.html]http://holynerdvana.blogspot.com.au/2013/05/detailed-settings-for-600khashsec.html[/url]

After about ten seconds it crashes the PC and a reboot is required, i tried this a few times. Is there something I can do to get it stable? SHould i try upping the voltageon the GPU? It was at 1.100 but its currently at 1.111 and neither are stable. :o

[quote name=“marhaben” post=“40436” timestamp=“1386316819”]
[quote author=cjflis link=topic=5488.msg40432#msg40432 date=1386316032]

I believe cgminer dropped support for scrypt mining after 3.7.2, so I would look for that version. Incidentally that is what I use and it seems to be stabler and more efficient than guiminer.
[/quote]

Thanks but I just downloaded that version and its crashing again. Is there something else it could be?
[/quote]

A number of factors could be affecting you. Cgminer doesnt like having less than 2gb of ram. If you have more than that i would look at the software angle. Did you uninstall your drivers completely before reinstall? Is your batch file set up with the proper hardware specs (shaders, thread concurrency, etc)? Is your batch file syntax correct? As in it properly points at your account? And have you reset since switching versions of cgminer?
[/quote]

Yeah im trying to go down the list but nothing seems to work. I have 12gb of ram. First I installed the SDK, then i uninstalled the drivers by going to amd driver updater, and then clicking “uninstall all amd software” as recommended on the amd sight, then reinstalled. As for the batch file i wrote it earlier, i just tried to keep it as simple as possible, and yeah its got my correct details filled in. Yeah i reset just before aswell.

Im running out of ideas. Thanks for your help so far is there something else i should do?

I believe cgminer dropped support for scrypt mining after 3.7.2, so I would look for that version. Incidentally that is what I use and it seems to be stabler and more efficient than guiminer.
[/quote]

Thanks but I just downloaded that version and its crashing again. Is there something else it could be?

Thanks i foun another suggestion to add “pause” at the end which i believe is the same and it is now staying there.

Initially it said “–scrypt is an unrecognized command” so i deleted scrypt.

Then it said “–intensity is an unrecognized command” so i deleted that aswell.

My new file looks like so
__________________________________________________________________
cgminer.exe -o stratum+tcp://pool.fcpool.com :3334 -u USERNAME -p PASSWORD

GPU_MAX_ALLOC_PERCENT 75

pause

But when i run it it crashes instantly, and i have the AMD SDK installed. Im very confused :S

Hey thanks i figured out how to link it to my wallet, however now im haing another issue.

GUIminer started going slow so i thought i would try CGminer cause people say its faster.

Everytime i run the .bat file it instantly closes. Is there something i am doing wrong? I tried reinstalling my graphics driver but still nothing.

The version of CGminer is 3.8.4 and this is what I wrote this in my notepad

cgminer.exe --scrypt -o stratum+tcp://pool.fcpool.com :3334 -u USERNAME -p PASSWORD --intensity 13

Any ideas?

Hey so i got it going ! Question again though while i am mining through GUIminer how do i link it to my wallet?

[quote name=“forcefedflesh” post=“40374” timestamp=“1386299115”]
Hey man, Usually I just close it out, Wait 10 secs to be sure it closed all the way then open it back up.

I put the cursor over the Green bar where its loading and I wait till it finishes. Ive noticed that when you do other things like browsing web ect. it stops and also goes backwards weirdly sometimes over other clients like LTC as well.

Just let it do its thing go AFK for a hour and keep it on the FRONT of the desktop meaning its the program you are currently on and do not use the computer till its done.

Also yes you should get about that rate.
[/quote]

Wow thanks for a quickand helpful reply man :) I will give it a try