New P2Pool Node - East Coast USA - NO FEE!
-
@mirrax said:
@RIPPEDDRAGON said:
any guesses who is running the 80MH/s rig on coinotron? I feel like I need to get rigs 4 and 5 built so I can get more than 10 MH/s…
Why not sold the parts and buy FTC directly while the price is low?
@Mirrax, there is fun in mining for a miner as there is fun in trading for you :-)
-
I am sure you are sleeping and have a notification in your email but @AmDD your pool is down :)
-
@RIPPEDDRAGON said:
I am sure you are sleeping and have a notification in your email but @AmDD your pool is down :)
Thanks. Not sure whats going on. The server is online - I can SSH into it. The services are running. Let me restart them and see if that helps.
P2Pool Node: http://104.236.34.9:19327/ 0.5% fee
-
@AmDD said:
@RIPPEDDRAGON said:
I am sure you are sleeping and have a notification in your email but @AmDD your pool is down :)
Thanks. Not sure whats going on. The server is online - I can SSH into it. The services are running. Let me restart them and see if that helps.
Looks to be back now. I need to come up with some sort of notification if this happens again.
-
The stats section seems to be running WAY faster today after you got the server back up. I have had some slowness and freezing on that page over the last week or so.
-
@AmDD and the node is down again, sorry bud
-
@RIPPEDDRAGON said:
@AmDD and the node is down again, sorry bud
I found a free service that emails me when the site goes down… I got this notification before I got theirs… lol
I reset it again, I’ll try to drill down and see whats causing it. I hope you have backup pools setup. :/ Sorry for the issues.
-
@AmDD said:
@RIPPEDDRAGON said:
@AmDD and the node is down again, sorry bud
I found a free service that emails me when the site goes down… I got this notification before I got theirs… lol
I reset it again, I’ll try to drill down and see whats causing it. I hope you have backup pools setup. :/ Sorry for the issues.
I set one up this morning, I thought I had one already set but I had lost it when I want from ftctheblocksfactory mining to p2pool mining, oops. Don’t worry about it :) however, you have by far the fastest p2pool server for me so when you go down I am not nearly as efficient.
-
6 People and 10MH/s on this node. If you are in the USA come join us!
-
@RIPPEDDRAGON said:
6 People and 10MH/s on this node. If you are in the USA come join us!
Looks like you went offline.
Ive got my cards running near 400khs now which puts me at just over 2MHs. Once I get more power in that room I can fire up the rest of my cards and I should be about 3.4MHs. Maybe this week… -
@AmDD said:
@RIPPEDDRAGON said:
6 People and 10MH/s on this node. If you are in the USA come join us!
Looks like you went offline.
Ive got my cards running near 400khs now which puts me at just over 2MHs. Once I get more power in that room I can fire up the rest of my cards and I should be about 3.4MHs. Maybe this week…Had some friends over for the day to play some Magic and Poker, didnt want to be blasting them with the servers. Back online now!
-
Gents, I suggest to configure 2 different p2pool nodes in your miners, e.g. The one from ripperdragon and my one, one acting as primary, the other as secondary.
That way you won’t loose payouts if one pool node goes down, as the shares you mine on one node are counted on the other one, if your miner switches nodes.
-
So I went to update my pool to 0.9.3.1 and it blew up. Doesnt seem to be related to the update - i lost networking on the node. Contacted tech support and they were unable to help so I had to reinstall.
Ive followed @Wellenreiter 's guide and with this version of feathercoind (0.9.3.1) running the command ‘feathercoind’ i never get returned to the # prompt. This never happened before with other versions. I can close the console and it seems to keep running. Just pointing it out.
The P2Pool node will be back once feathercoind syncs.
-
Be sure to have the daemon=1 in your config file, or supplied the parameter -daemon when starting fathercoind.
-
Hi folks! @AmDD, hope you’re able to keep your pool running, I’m pointing 1.8MH at you and plan to keep it that way from here out for a while. :) Switched from coinotron; I always liked and used p2pools in the past (x11 mostly), but seems the ftc p2pools are quite dry these days. (Everyone mining ethereum? I’m done with that… :)) And thanks for keeping the fee low, .5% is great.
So, does anyone know who runs the other US pool in the current list, 65.101.238.110? It doesn’t have any hash on it at all right now. I’d like to set it as a failover, just in case, though p2pool.neoscrypt.de might be ok (I’m on the east coast).
Doug
6zfyk4kkA58U89YcnPgrbLuGbwGUQwmdPo -
@bluebox I should be able to keep it running for awhile. I have considered either a lerger fee or smaller (ie. zero) just because the dust payments from a .5% fee are a pain to deal with.
Happy hashing!
P2Pool Node: http://104.236.34.9:19327/ 0.5% fee
-
@AmDD coinotron is charging 1.5%pplns, so if you doubled yours to 1% I wouldn’t mind a bit. Rather you (and anyone else) charge what it’s worth to keep things going! Just need more miners on the p2pool node(s)… Quite happy getting what looks like 20%+ more ftc than from coino’s pool — this kind of efficiency is the reason I like p2pools!
-
This is weird in a good way: after just 3 payouts (12 hours), I’m averaging just over 2X what I mined from coinotron in the same time, or 290 FTC/day vs. 138. I know, I know, going to wait for a few days before “confirming”. Even so, at the current sell-off price of .000062 this would be generating $10/day, $2 better than Ethereum @ $9.75/eth hashing on the same cards… goodness me.
Difficulty has averaged about the same throughout the last two weeks, bouncing between 12 and 25. I’ve never seen this kind of difference between pools anywhere before. Could be because I’m 95% of the public p2pool hash, or 38% of “global speed” according to your piechart?.. Either way this is crazy. Crazy good. :stuck_out_tongue_winking_eye:
-
@bluebox said:
@AmDD coinotron is charging 1.5%pplns, so if you doubled yours to 1% I wouldn’t mind a bit. Rather you (and anyone else) charge what it’s worth to keep things going! Just need more miners on the p2pool node(s)… Quite happy getting what looks like 20%+ more ftc than from coino’s pool — this kind of efficiency is the reason I like p2pools!
At current usage the operation of a p2pool node never get’s financed with the pools fees. It’s all good will and investment for a hobby of the operators.
-
@AmDD I should have some time tonight to point some miners back at this node. Let me know if you are ever debating shutting this node down, I dont mind helping keep a good east coast node up.
Also it appears the miner stats page isnt working.
